Standard Horizon SPF-9 20 Bin Booklet Making System
QC-S10 S/N 039014
QC-S10F S/N 012304
SPF-9 S/N 048006
Booklet Making System Description
The Standard SPF-P9 bookletmaker is well suited to run both off-line or in-line with the QC-S30 collators. Capable of producing booklets at speeds up to 1,980 booklets per hour, the SPF-P9 features simple semi-automatic setup. Changing over to any size sheets from 8.5" x 11" to 11" x 17 is accomplished by rotating the easily accessible control knobs. When working with 8.5" x 11" sheets, finished sets can be stapled and folded, folded only, top or side stapled or top stapled and folded.
The FC-P9 Face Trimmer can be added to trim the edge of the book by .08" to 1/2" to provide the highest quality booklets.
Booklet Making System Features
Flat finishing - Staples are formed to a flat shape for flat, tidy stacking.
Robust folding - A strong, rigid folding unit provides smooth, flat folds.
Professional finishing appearance - The booklets are stapled in the SPF-P9 and finalized in the FC-P9 with a clean, sharp edge trim. Just press the collating start button on the QC-S series and receive neatly finished booklets.
High productivity with 33 booklets per minute
Ideal for manuals and documents, with speeds that support a wide volume range.
Easy maintenance - The error monitor informs when to remove a jam or change staples. Easy jam clearance so you can restart jobs quickly.
Bookletmaking Flow - The neatly bound booklets are stacked. The paper is folded in the center.
The fore-edge of the booklet is trimmed. The set is stapled. The set sheets are collated.
Booklet Making System Specifications
Functions Bookletmaking, Top/Side Stapling, Folding only,Top Stapling and Folding
Sheet Size Max.12.59" W x 17.71" L - Min. 7.17" W x 10.12" L
Matrix Size SRA3 / A3 / A4 / 8.5" x 11" / 8.5" x 14" / 11" x 17"
Bookletmaking : SRA3 (Manual Feed Only) / A3 / A4 /
11" x 17" / 8.5" x 11" / 8.5" x 14"
Top/Side Stapling : A4 / 8.5" x 11"
Folding Only : SRA3 (Manual Feed Only) / A3 / A4 / 11" x 17" /
8.5" x 11" / 8.5" x 14"
Top Stapling and Folding : A4SEF / 8.5" X 11"SEF
Sheet Weight Range Normal Paper : 64 to 127.9 gsm
Coated Paper : 104.7 to 157 gsm (Manual Feed Only)
Staple Thickness Bookletmaking : 2.5 mm (0.098) (25 sheets of 81.4 gsm normal paper)
Top/Side Stapling : 3 mm (0.11") (30 sheets of 81.4 gsm normal paper)
Fold Thickness 2.5 mm (25 sheets of Normal Paper 81.4 gsm)
Staple Distance Fixed 120 mm (4.7")
Stapling WIre Cartridge Type (5,000 staples/cartridge)
Receiving Capacity 40 books (A3, 10 sheets of Normal Paper 81.4 gsm, Bookletmaking)
Production Speed Max. 33 booklets/min.
Power 115 V, 50 / 60 Hz, 590 / 620 W
Machine dimensions Stand Alone : 35.4" W x 26.0" D x 31.3" H
with Delivery Tray : 50.0" W x 26.0" D x 31.3"H
Machine Weight 154 kg (340 lb)
FC-P9 Major Specifications
Booklet Size (Before Trim) Max. 12.59" x 8.85"
Top to bottom x Spine to fore-edge Min. 8.27" x 5.83"
Booklet Size (After Trim) Max. 12.59" x 8.85"
Top to bottom x Spine to fore-edge Min. 8.27" x 5.44"
Trimming Width 2 to 13 mm (0.079 to 0.51")
Trimming Thickness Max. 3 mm (0.11")
Production Speed Max. 33 booklets/min.
Power 115 V, 50 / 60 Hz, 180 W
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
3. Buyer's Premium. You agree to pay a buyer's premium of 9% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; August 21st, 2018. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard, Paypal
5. There will be a 4% Buyers Premium Discount on any payments made by Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check
6. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
7. Removal dates. Lots will be available for pickup on these dates:
- Monday through Friday; 8:00 am to 4:00 pm; Saturdays by Appointment
- All lots must be removed before 4:00 p.m., Friday, September 7th, 2018
- Special Exceptions can be made for large items or bidders loading overseas shipments
8. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
9. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
10. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and eletric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
11. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
12. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
13. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
14. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
15. Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Large items will be skidded, banded, and shrinkwrapped at no additional charge if buyers total invoice is over $1000. We also offer UPS & FEDEX packaging at a small charge for smaller items if total invoice is under $1000 or FREE packaging if over $1000. We also have multiple loading docks, forklifts, and ground level access for loading buyers vehicles
Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.