2005 MBO B118 Pile Feed Paper Folder with 8 Page Unit
S/N 15596
Retail Price: $35,000.00
New pile feeder, especially developed for
this range of sheet size. Sensitive pile height
control through micro-switch at the end of
pile. Optimized sheet separation, in particular
through the frontal air blast by air tube as well
as two side blowers in connection with the
micro-switch at the end of pile. Air support
through maintenance-free turbo type air pump.
Micro-Processor Control MS
Main control panel with raised MS control. The microprocessor control MS
simplifi es and reduces set-up times. The sheet is measured without input of
length, path or times and, depending on the sheet size, the suction lenght
and the sheet gap are determinded and adjusted.
Two sheet infeed systems are available:
• Photocell control • Impule control
An error display as well as a multi-functional batch counter are integrated
into the control system. Through a linkage to the MBO DATAMANGER, it
is possible to combine superior systems of operational- ans set-up data.
Through CIP 3-4 or JDF, for the integration into a digital workfl ow.
Buckle plates/Sheet defl ectors
Stainless steel, non-marking buckle plates with fi ne adjustment for
the sheet stop, and swing defl ectors on the buckle plates.
One-man operation is possible due to the clamping levers being
positioned at the operator‘s side.
Spiral fold rollers
MBO spiral fold rollers – the perfect solution for best grip and low
noise. No marking on sensitive papers and prints. The inclusion of
quality-built MBO fold roller quick-setting elements provides optimum
operator-friendly operation.
Belt drive system
Extremely quiet running, maintenance-free and long life - the MBO
belt drive system throughout the entire machine combines effi ciency
with quality. More than 100,000 units prove it.
Slitter shafts with plug bearings
30 mm Ø in all units. Allows various special devices such as gully
cut, edge trim, etc. Time-saving make-ready as the slitter shafts are
quickly removable through the plug bearings and may be adjusted to
the paper thickness by the quick-setting elements.
Hook-on stream delivery SE 460
With own drive and speed regulation.
Standard delivery at machine confi guration “4” and “44”.
Can only be used for this two confi gurations.
Paper Folder Features
• MS machine control including multi-functional batch counter
• Pile feeder F 460 with front and lateral sheet aeration
• Sheet infeed by suction wheel
• Sheet alignment through ball rail
• 4 stainless steel buckle plates with swing defl ectors
• Belt drive system throughout the entire machine, low maintenance and low noise
• Spiral foldrollers coated with standard PU
• Stainless slitter shafts, quickly removable by plug bearings, 30 mm Ø
• Perforating, scoring and cutting devices for standard work
• Safety device above the slitter shafts, electrically locked
• Hook-on stream delivery SE 460, at machine confi guration “4” and “44”
• HHS gluing device
Paper Folder Specifications
Feeder F460
min. 10.5 x 10.5 cm (4 1/
8
x 4 1/
8
”)
min with VACUSTAR 10.5 x 15.0 cm (4 1/
8
x 6”)
max. 46.0 x 66.0 cm (18 x 26”)
Working widths
Folding unit I 46.0 cm (18”)
Folding unit II 46.0 cm (18”)
Folding unit X 46.0 cm (18”)
Number of buckle plates
Folding unit I 4 buckle plates
Folding unit II 4 buckle plates
Minimum folding length
3,2 cm (1 2/
8
”)
Maximum folding length
Folding unit I
· Buckle plate 1 and 2 46.0 cm (18”)
· Buckle plate 3 and 4 34.5 cm (13 1/
2
”)
Folding unit II
· Buckle plate 1-4 34.5 cm (13 1/
2
”)
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
3. Buyer's Premium. You agree to pay a buyer's premium of 9% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; October 30th, 2018. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard, Paypal
5. There will be a 4% Buyers Premium Discount on any payments made by Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check
6. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
7. Removal dates. Lots will be available for pickup on these dates:
- Monday through Friday; 8:00 am to 4:00 pm; Saturdays by Appointment
- All lots must be removed before 4:00 p.m., Friday, November 2nd, 2018
- Special Exceptions can be made for large items or bidders loading overseas shipments
8. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
9. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
10. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and eletric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
11. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
12. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
13. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
14. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
15. Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Large items will be skidded, banded, and shrinkwrapped at no additional charge if buyers total invoice is over $1000. We also offer UPS & FEDEX packaging at a small charge for smaller items if total invoice is under $1000 or FREE packaging if over $1000. We also have multiple loading docks, forklifts, and ground level access for loading buyers vehicles
Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.