Lot #44: GBC Pro-Tech Orca III Industrial Large Format Hot / Cold Laminator - Click for Video!

Retail Cost - $30,000+

Laminator Specifications

Dimensions (L x D x H) 82" x 33" x 60" (2.1 x .84 x 1.52 m)

Weight: 2500 lbs (1179 kg)

Laminating Rolls: 61" (155 cm) roll face with thermally conductive high release silicone surface; upper and lower main rolls internally heated; temperature controlled by state-of-the-art infrared sensors and digital PID controllers

Laminating Opening: 1.5" (3.8 cm) maximum opening controlled with dual air cylinders.

Laminating Material Uses heat activated and pressure-sensitive materials 0 - 55" (0 - 140 cm) wide on a 3" (7.6 cm) ID core

Laminating Speeds 0 to 14.5 fmp (0 to 4.5 mpm)

Post Lamination: Fanless cooling system provides uniform, filtered air for thermal shock without exposure to dangerous fan blades.

Vinyl Transfer Complete roll to roll transfer, lamination, and edge trimming in one pass

Safety Features 

• Two emitter-receiver photoelectric systems protect rolls from damage. 

• Emergency kick cables front and rear. 

• All electrical and moving mechanical parts are located in bolted cabinets 

• Four emergency stop buttons

Installation Requirement 220 to 240 VAC, 50/60 Hz, 55A. 32 A per phase.

Air: 2 cfm at 100 psi, minimum(0.5 m3 at 700 vPa)

AA&D PressExchange can help crate or palletize this item and also help arrange shipping to your location. If you have any questions feel free to call us at (817) 386-0536 or send us an email at aad.pressexchange@gmail.com

Note: These specs have been taken from the manufacturer's website for a brand new item. There may be mention of optional accessories, which may or may not be included with the used item actually being sold here. There may have been improvements in production specifications between the used item's date of manufacture and brand new items. To be clear, you are bidding on the item in the photographs, not the item described in the manufacturer's latest literature. Minimal Inspection done.