Stanley Bostitch StitchMaster SM-A25 Double Head Flat Book / Saddle Stitcher
S/N 17644
S/N 17645
Retail Price: $5,400.00
Stitcher Description
The DeLuxe Stitcher StitchMaster is the Graphic Arts Industry’s premier, portable, high-quality stitcher. It is quiet, fast and very dependable, in addition to being affordable. The StitchMaster is constructed in such a way that two machines may be mounted side-by-side to effectively create a dual-head stitcher at a cost considerably below that of a traditional multi-head stitcher.
There are two StitchMaster models; the SM-A which operates on 115VAC and the SM-CE which operates on 230VAC and conforms to all pertinent CE standards. All other performance characteristics of both models are the same. The StitchMaster comes standard with parts for 25 gauge or smaller round wire. However, any StitchMaster can be modified to accommodate the following wire sizes: 23 or 24 gauge round or 21 x 25 flat.
The StitchMaster has a capacity from two sheets up to 1/4” (6.4mm), or sixty sheets of 20 pound bond paper. It accommodates both Flat and Saddle stitching. The StitchMaster has side stops which are easily adjusted from 2.5” to 26” wide. There are also pop-up pins for convenient corner stitching. In addition, the StitchMaster has movable clinchers for a tight stitch and one knob adjustment for both work thickness and centering the stitch.
The Stitchmaster has a rear contact trip and a foot switch for easy operation and single or continuous stitch modes can be accomplished at the touch of a button. It can clamp either to your own work table or to a heavy duty floor stand, which adjusts vertically from 28” to 42”. The stand is an optional piece of equipment which can be purchased through your DeLuxe Stitcher Graphic Arts Representative. The StitchMaster can be plugged into any standard wall outlet.
The StitchMaster has a 5” (12.7 cm) throat depth for flat or horizontal stitching and a depth of 9” (22.9 cm) for saddle stitching. The heavy-duty work table is 16” (40.6 cm) wide and adjusts easily for flat or saddle work. The overall height combined is 24” (61.0 cm), the depth is 15” (38.1 cm) and the width is 16” (40.6 cm) with the table and 4” (10.2 cm) without the table. For either the SM-A or the SM-CE, the machine itself weighs 28 lbs. (12.7 kgs.). The shipping weight including the wire spool, foot switch and tables is 50 lbs. (22.7 kgs.)
Stitcher Specifications
Weight
Shipping Weight . . . . . . . . . . . . . 50 lbs (22.7 kg)
StitchMaster Machine Unit
SM-A25 . . . . . . . . . . 28 lbs. (12.7 kgs)
Wire Spool . . . . . . . . . . . . . . . . . 5 lbs. (2.3 kgs)
Foot Switch . . . . . . . . . . . . . . . . . 4.5 lbs. (2.0 kgs)
Tables . . . . . . . . . . . . . . . . . . 4.7 lbs. (2.1 kgs)
Physical Dimensions
Height . . . . . . . . . . . . . . . . . . 24” (61.0 cm)
Width With Tables . . . . . . . . 16” (40.6 cm)
Without Tables . . . . . . 4” (10.2 cm)
Depth . . . . . . . . . . . . . . . . . . 15” (38.1 cm)
Stitching Capacity . . . . . . . . . . . . . . . . . Two Sheets to 1/4” (6.4 mm)
Wire Types . . . . . . . . . . . . . . . . . . 23 through 28 round or 21 x 25 flat
( 25 gauge round standard )
Throat Depths
Flat (Horizontal) . . . . . . . . . . . . . 5” (12.7 cm)
Saddle (Diagonal) . . . . . . . . . . . . 9” (22.9 cm)
Side Stops . . . . . . . . . . . . . . . . . . 2” - 14” (5.1 - 35.6 cm)
Power Requirements
SM-A . . . . . . . . . . . . . . . . . . 115VAC 50/60 Hz
Minimum Recommended Circuit Capacity
SM-A . . . . . . . . . . . . . . . . . . 1.0 A
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
3. Buyer's Premium. You agree to pay a buyer's premium of 9% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; April 23rd, 2019. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard, Paypal
5. There will be a 4% Buyers Premium Discount on any payments made by Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check
6. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
7. Removal dates. Lots will be available for pickup on these dates:
- Monday through Friday; 8:00 am to 4:00 pm; Saturdays by Appointment
- All lots must be removed before 4:00 p.m., Friday, February 8th, 2019
- Special Exceptions can be made for large items or bidders loading overseas shipments
8. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
9. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
10. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and eletric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
11. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
12. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
13. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
14. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
15. Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Large items will be skidded, banded, and shrinkwrapped at no additional charge if buyers total invoice is over $1000. We also offer UPS & FEDEX packaging at a small charge for smaller items if total invoice is under $1000 or FREE packaging if over $1000. We also have multiple loading docks, forklifts, and ground level access for loading buyers vehicles
Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.