2013 SEAL 62 Pro D 61" Wide Format Roll Laminator
S/N 64138-00470
Retail Price: $28,000.00
Laminator Description
The SEAL 62 Pro D Wide Format Roll Laminator is capable of mounting, laminating and encapsulating prints up to 61" wide at a speed of 20 feet per minute. Positioned for production, the 62 Pro D offers dual heated rollers, five un-wind/take up shafts and a revolutionary film saving flip up pull roll system. It is ideal for all hot/cold applications using materials up to 61" wide and 1.5" thick, including high speed, single pass encapsulation up to 10 mil over 10 mil. The 62 Pro D comes standard with a print roll trough mounted to the front table, an additional bracket to hold a spare auto-grip shaft and a rear nip adjustment handle. With fully adjustable temperature, speed and pressure settings the 62 Pro D is ideal for the more experienced finisher requiring a highly versatile laminator.
Product Details
Dual heated rollers make most applications, including encapsulation, easy while superior roller technology delivers better processing of soft substrates.
Laminates graphics up to 61" wide.
Capable of laminating at speeds up to 20 feet/minute.
1 1/2" manual nip adjustment allows for precise operation and accomodates most substrates.
Roll-to-roll operation (from bottom unwind) to accommodate applications including vehicle wraps.
14.28 lbf/in (2.5n/mm) line pressure for superior cold lamination.
Lightweight drop-in supply shafts with auto-grip for easy loading of materials in tight spaces.
Auto-grip upper take-up shaft for winding release liners.
Exclusive ‘stay-put’ swing up feed table keeps table up, making media handling and set-up a snap and flip up pull rollers for no hassle loading.
Comprehensive safety system with emergency stops and self-checking safety eyes.
Foot switch for hands free operation.
Ergonomic touch pad control panel.
Image guide to ensure perfect alignment and roll trough to keep rolled prints in place before and during lamination both standard.
Optional easy-in feed table and slitter to make laminating a snap while the optional fan banks cools the machine down when both rolls are heated.
Item Specifications
Depth: 17.7" (450 mm)
Electrical Requirements: 1N/PE 230VAC +/-10%, 50/60 Hz, 35A
Heated Rollers: Dual
Maximum Roller Temperature: 284F (140C)
Maximum Speed: 20 ft/min (6m/min)
Maximum Substrate Thickness: 1 1/2" (38mm)
Maximum Working Width: 61" (1550 mm)
Net Weight: 994 lbs ( 450 kg)
Dimensions: 87.4" x 56.3" x 17.7" (2220 x 1430 x 450mm)
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
3. Buyer's Premium. You agree to pay a buyer's premium of 9% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; Within 5 Business Days of the auction. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard, Paypal
5. There will be a 4% Buyers Premium Discount on any payments made by Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check
6. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
7. Removal dates. Lots will be available for pickup on these dates:
- Monday through Friday; 8:00 am to 4:00 pm; Saturdays by Appointment
- All lots must be removed before 4:00 p.m., Within one week of the auction end date.
- Special Exceptions can be made for large items or bidders loading overseas shipments
8. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
9. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
10. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and eletric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
11. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
12. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
13. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
14. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
15. Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Large items will be skidded, banded, and shrinkwrapped at no additional charge if buyers total invoice is over $1000. We also offer UPS & FEDEX packaging at a small charge for smaller items if total invoice is under $1000 or FREE packaging if over $1000. We also have multiple loading docks, forklifts, and ground level access for loading buyers vehicles
Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.