2018 Muller Martini Presto II Digital Roll Feed Saddle Stitching Line w/ MBO UW 52/520 Unwinder, SVC 525 C Sheeter, and DFT 560 DIGI-Folder - AVAILABLE FOR PRESALE - New Cost 2 Years ago 900k - Click for Video!

Description

New Cost in 2018 - $900,000

Digital Processing Systems

One (1) MBO-DIGITAL UW 52/520 Unwinder

The UW 520 is a digital unwinding machine featuring dancer-controlled web tension and a center driven servo motor. It comes equipped with an electric paper lift, an integrated splice table, as well as a de-curling device making it easy to operate and quick to set-up. This machine is designed to be integrated into any digital printing or web finishing line.

Integral web guide included with brackets and electrical accessories

Core shaft with pneumatic bladder to secure roll core to shaft

Electric Paper lift

Variable or constant web tension capability

Fast web change splice table

Integrated de-curling device

Robust chain drive

Technical Specifications

Roll Diameter Max. 1320mm (52”)

Web Width Min. 150mm (6”)

Web Width Max. 520mm (20.5”)

Production Speed Max 300mpm (990fpm)

Paper Stock Min. 40 gr/m2

Paper Stock Max. 250 gr/m2

Air Pressure requirement 6 bar (98 PSI)

Power Requirements 3 PH, 400VAC, 50-60Hz, 32A

One (1) MBO DIGITAL SVC 525 C Digital High-End Sheeter

The SVC 525 C is a core component in MBO’s state-of-the-art digital web finishing systems. This servo driven sheeter is engineered to provide high quality precision cuts for a broad range of production demands. The SVC line also features a convenient touchscreen control which allows the operator to set changes in the format without making adjustments to the mechanical components. As with all MBO finishing modules, the SVC 525 C’s robust components are built to withstand continuous use in a 24/7 commercial print environment.

Touch screen user interface

Air supported paper flow

Sheet format recognition

VSN kit: chip-out remover

Infeed with web tension

Variable format length from 5” to 80” cutoff

Transformer included for US 480 V to 400 V

Interface connection to inline components (IFF)

Elevation to match the stitcher line application

Technical Specifications

Format sizes with chip-out: 5″ – 80″ (127 mm – 1016 mm)

Format sizes without chip-out: 3″ – 80″ (76 mm – 1016 mm)

Chip out size: 3/16″ – up to 3 1/8″ (4 mm – up to 80 mm)

Web with max: 20”

One (1) MBO DFT 560 DIGI-Folder FW I-SELECTIVE

The DFT 560 DIGI-Folder is a module capable of making high speed buckle folds in line with the sheeter and stitcher system. The folder can take any sheet length from the sheeter and fold it using up to 4 plates as a preparation for the stitcher. A4 and A5 formats are available using any cutoff length needed to provide the correct imposition and page count. This allows the finishing line to run significantly faster than using standard 4 page input.

The selective fold plate capability allows larger page count signature folding prior to the stitcher, while still allowing a minimum of 4 page jumps for the A4 family of products on the stitcher output.

MC control

SELECTIVE Fold plate capability, on the fly

Non-marking vacuum register table

Anti-static lattice alignment table

(4) four buckle plates with swing deflector

Through sheet stops in first buckle plate

Low maintenance and low noise belt drive

Quick exchange slitter shafts

Scoring, perforating, and cutting device

SSC slitter shaft cassette for single rear slitter shafts

Superscore tooling included

Speed synchronization

DFT Interface AI-DFT-Xs421

Technical Specifications

Running Direction: right to left

Standard Sheet Length: 800mm (31-1/2”)

Optional Sheet Length : 1260mm (49-5/8”)

Sheet Width Min.: 150mm (6”)

Sheet Width Max.: 560mm (22”)

Infeed Height: 1065mm (41-7/8”)

Outfeed Height After Parallel Fold: 980mm (38-5/8”)

Speed Min.: 10 mpm (394fpm)

Speed Max.: 230 mpm (9055fpm)

One (1) H+H 407-20” cross carrier

The 407 is a cross carrier table used primarily for product alignment and speed match. In this arrangement the table is used to align the folded or non-folded sheets to the plow section of the stitcher. The table furthermore matches the sheet speed for maximum production. The high-speed guide allows for superior alignment accuracy during production. This machine is independently driven and has an independent self-control.

Special height to match the stitcher infeed (1035 mm)

Self-control capability

High-Speed-Guides on left side

Working width: 20”

Plow Folder Unit, consisting of:

ASIR camera

Intermediate element

Universal base

Collating unit

Connection to saddle stitcher Presto II

Product placed first down on the chain

1 Single handfeed station with swords and gathering chain

1528 Folder Feeder

Folder feeder 1528 to Presto II, consisting of:

Gathering chain

Operating unit HMI

Misfeed control monitors feeding

Assisted feeder timing

Minimum level control

Vulcanized squeeze roller

Two (2) scoring wheels (standard and tWin Score)

ASIR 3 (Automatic Signature Image Recognition) for 1528 folder feeder to Presto II, consisting of:

One (1) sensor for barcode 128C and image recognition

Interface wiring

Operating software

1550 Compressors

Electrical control box per machine for max. 6 PV-pumps.

Range of application:

– 3x 200-460V, 50-60Hz for DVT 3.100, KVT 3.100 and KVT 3.140

Vacuum pump KVT 3.100

Compressor KDT 3.100 (1.5 bar)

1550 Presto II Stitching Machine

Stitching machine Presto II including:

Automated gathering chain timing

Electric line shaft connection to 1565

Standard length monitor and staple control

Pluggable wire connections between feeders and trimmer

Reject tray for incomplete copies

Remote control to Presto II

Control panel to Presto II touch-screen-operating, setup assistant

Side thickness measurement Semko to Presto II

Stitching head HK 75Q Quick-Setup staple 12 mm

Centering roller fix diameter = 22 mm for stitching head

-Ability to stitch more pages. Performance Plus allows you to use a smaller wire diameter without sacrificing the strength of a larger wire.

-Smaller wire diameters help reduce stacking height.

-Small wire diameters yield more stitches per spool.

-Ideal for loop or saddle stitching applications.

-One wire size for multiple number of jobs to simplify your operation.

-Better bending and forming characteristics.

-Electro galvanized finish.

-Consistent tensile strength. Consistent wire size. Consistent and uniform coating.

-Trouble free de-spooling and low maintenance.

-Can be used with most standard de-spoolers.

De-spooler for 35 or 70 lbs. Performance Plus Wire

1565 Three Knife Trimmer

Three-knife-trimmer 1565 for 1550 Presto II, consisting of:

Cutting sequence: front cut – head and foot cut

Automated yoke timing

Controlled 6 bar trim blow down

Safety guards

Set of steel knives

1564 Belt Delivery for 1550 Presto II

Shingle delivery 1564 to Presto II and Primera, with gap compensation, lateral separation of the shingle stream and variable drive

Busch Waste Conveyor

Busch Waste Conveyor System includes:

HF 35 conveyor transfer trim waste into

(1) KF 145-600 conveyor which drops trim waste into waste bin.

Seller's Terms

The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.

1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.

2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.

3. Buyer's Premium. You agree to pay a buyer's premium of 9% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.

4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; Within 5 Business Days of the auction. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard

5. There will be a 4% Buyers Premium Discount on any payments made by Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check

6. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.

7. Removal dates. Lots will be available for pickup on these dates:

- Monday through Friday; 8:00 am to 4:00 pm; Saturdays by Appointment

- All lots must be removed before 4:00 p.m., Within one week of the auction end date.

- Special Exceptions can be made for large items or bidders loading overseas shipments

8. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.

9. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.

10. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and eletric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.

11. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.

12. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.

13. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.

14. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.

15. Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.

Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.

Shipping Info

Large items will be skidded, banded, and shrinkwrapped at no additional charge if buyers total invoice is over $1000. We also offer UPS & FEDEX packaging at a small charge for smaller items if total invoice is under $1000 or FREE packaging if over $1000. We also have multiple loading docks, forklifts, and ground level access for loading buyers vehicles

Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.

Seller's terms

2018 Muller Martini Presto II Digital Roll Feed Saddle Stitching Line w/ MBO UW 52/520 Unwinder, SVC 525 C Sheeter, and DFT 560 DIGI-Folder - AVAILABLE FOR PRESALE - New Cost 2 Years ago 900k - Click for Video!

Description

Seller's Terms

Shipping Info

Video

You may also be interested in...