Model BDF S/N: 40.12.2.1658
The Bourg Document Finisher (BDF-e) is a high-end, compact and fully automated booklet maker. All parameters are controlled by a user-friendly color touchscreen interface in which stitching, folding, and trimming operations are completed in a single enclosed unit. This guarantees set integrity and a maximum speed of 4,200 booklets/hour.
The BDF-e is connectable with a BSF and seamlessly integrates the benefits of Off-Line and In-Line finishing, ideal for customers hesitating between Off-Line and In-Line finishing (see the description of the BSF).
Since the BDF-e can be directly connected to multiple print engines such as Kodak, Océ/Canon and Xerox,, it is the perfect choice for in-plants or commercial print shops that need to produce booklets in production runs from one to thousands.
Specifications
Maximum Speed 4,200 booklets/hour (5 A4 sheets, 90 gsm)
Paper weight 60 to 300 gsm
Face trimming 0 to 20 mm (0 to 0.78 in)
SADDLE STITCHING
Minimum paper size * 120 x 203 mm (4.72 x 8 in)
Maximum paper size 356 x 520 mm (14.01 x 20.47 in)
Booklet thickness (with fold and cut) 2 to 22 sheets of 80 gsm or equivalent (cover included)
TOP/SIDE STITCHING
Minimum paper size * 120 x 76 mm (4.72 x 3 in)
Maximum paper size 356 x 297 mm (14.01 x 11.69 in)
Booklet thickness (without fold nor cut) 2 to 55 sheets of 80 gsm or equivalent (cover included)
FOLDING/TRIMMING
Minimum paper size * 120 x 76 mm (4.72 x 3 in)
Maximum paper size 356 x 260 mm (14.01 x 10.23 in)
Booklet thickness (fold and cut) 2 to 22 sheets (8 to 88 pages) of 80 gsm or equivalent (cover included)
* Software limitation to 127 mm (5 in) (instead of 120 mm - 4.72 in) in some particular cases
PHYSICAL
Dimensions (L x W x H) 158 x 61,3 x 194,3 cm
(62.20 x 24.13 x 76.49 in)
Weight 450 kg (990 lbs)
Delivery conveyor 90 cm (35.43 in)
ELECTRICAL / ACOUSTIC
Power supply 120V ±10%, 60Hz, 10A
230V ±10%, 50Hz, 7A
OPERATIONAL MODE
Power consumption 750 W
Radiant heat 2,600 BTU/hour
Sound level 70 dB
STANDBY MODE
Power consumption 150 W
Radiant heat 600 BTU/hour
Model BST 10 S/N: 02.37.2.0529
Model BST 10 S/N: 02.07.2.0508
Maximum Collator Sheet Size 20” x 13.75”
Min Collator Sheet Size 7.85” x 4.5”
C.P. Bourg has been Leading the Collating & Bookletmaking Marketplace Since 1960.
The Bourg Suction Tower (BST) is a modular, vacuum-feed, vertical collating system capable of producing more than 9,000 sets per hour. The BST is a true vacuum-feed system incorporating suction feed belts and air-blast sheet separation.
Changeover between 9lb to 10pt instantly, or collate all weights at the same time!
Nine user-programmable channels & MEMORY for quick job recall, anytime!
Control suction, air blast, transfer speeds, and other functions from the digital control panel.
Eight-part feed mechanism & four-part sheet separation process provide for complete control and NO MARKING OF STOCKS!
Advanced transfer technology eliminates the need for outdated sucker feet.
Two internal industrial turbines per tower.
Model TD-T/TD-d
Bourg TD-T
The Bourg TD-T Receding Vertical stacker provides an easy and efficient means for collecting straightest or off-set collated sets with your existing Bourg BST and BT collators.
SPECIFICATIONS
Model: TD-T
Max. Set Size: 13" x 18"
Min. Set Size: NA
Maximum speed: 5,500 per hr.
Power: 115 volt, 60 Hz
Length: 23.5"
Width: 29.5"
Height: 29"
Weight lbs.: 157
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
3. Buyer's Premium. You agree to pay a buyer's premium of 10% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; Within 5 Business Days of the auction. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard, Paypal
5. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
6. Removal dates. Lots will be available for pickup on these dates:
- Monday through Friday; 8:00 am to 4:00 pm; Saturdays by Appointment
- All lots must be removed before 4:00 p.m., Within one week of the auction end date.
- Special Exceptions can be made for large items or bidders loading overseas shipments
7. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
8. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
9. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and electric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
10. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
11. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
12. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
13. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
14. Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet for $25, packaged in a cardboard box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Large items will be skidded, banded, and shrinkwrapped at no additional charge if buyers total invoice is over $1000. We also offer UPS & FEDEX packaging at a small charge for smaller items if total invoice is under $1000 or FREE packaging if over $1000. We also have multiple loading docks, forklifts, and ground level access for loading buyers vehicles.
Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet for $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.