Seller's terms
.jpg)
.jpg)
Lot #17: 2013 Duplo DC-745 Slitter Cutter Creasing Machine w/ Composition Laptop, Rotary Tool Module, Slitter Module, and Business Card Tray
Sold by: Boggs Graphics Equipment Inventory ID #012323134028D WireBids ID #WB68403
$10: $250 to $999
$50: $1,000 to $9,999
$100: $10,000 and up
You can specify the maximum amount that you're willing to pay for an item. When you're outbid, we automatically bid on your behalf up to your maximum bid. We increase your bid by increments only as much as necessary to maintain your position as highest bidder. Keep in mind we will prefill the bid amount for you with the next minimum bid increment (even when you are outbid).
Description
S/N: 130150224
Creasing Machine Specifications
Feeder Capacity 150 mm (5.9”)
In-Feed Paper Size Width
Length
210 - 370 mm (8.26” x 14.56”)
210 - 650 mm (8.26” x 25.6”)
Finished Size Minimum (WxL)
Maximum (WxL)
48 mm x 50 mm / 1.89” x 1.97”
370 mm x 650 mm / 14.56” x 25.6” (up to 39.3” (999 mm) length can be programmed and
processed using the control panel)
Paper Weight 110 - 350 gsm / 80 lb. text - 130 lb. cover (127 - 350 gsm when optional deflector module is installed)
Speed (3-Step Setting) 50 ppm (A4 SEF, lead/trim 10 mm, center crease)
40 ppm when using CCD
Image Shift Compensation Reading modes: every sheet, every “x” sheet, adjust over “x” mm shift only, first sheet only
Tolerance ±0.2 mm
Slits 6 standard slitter tools (2 margin slitters, 4 center slitters)
2 optional slitter modules (each module carries 2 slitter tools) can be installed for a maximum of 10 slits
Cuts Maximum 20 cuts per sheet
Creases Maximum 15 creases per sheet
Crease Depth Adjustment 3 steps (from control panel)
Exit Tray Capacity 150 mm (5.9”)
Card Stacker (Standard) Type
Capacity
Stackable card size
Elevator-automatically lowers as finished pieces are delivered
90 mm (3.54”)
Width: 48 - 370 mm (1.89” x 14.56”)
Length: 50 - 150 mm (1.97” x 5.9”)
Standard Features 80 job memory in main unit; test feed (1 sheet); air knife; side blow; feed skew adjustment; ultrasonic double-feed
detection; automatic job recall via barcode reading; image drift compensation via registration mark reading; reject;
card stacker; waste chopper; waste box; emergency stop switch; cleaning mode; PC controller software
Options Rotary tool module (includes 2 each of perf, micro perf, score, slit-score); slitter module (2 independent sets of
slitters each, additional gutter deflectors required); cross perf module* (requires motor kit); deflectors module;
strike-perf; IFS
Power Consumption 115V: 5.5A 670W, 60Hz
230V: 3.2A 660W, 50/60Hz
Dimensions (WxDxH) In use: 2300 mm x 875 mm x 1120 mm / 90” x 34” x 44”
Required Footprint (WxDxH) 2820 mm x 1700 mm x 1620 m
Seller's Terms
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
3. Buyer's Premium. You agree to pay a buyer's premium of 10% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; Within 5 Business Days of the auction. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard.
5. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
6. Removal dates. Lots will be available for pickup on these dates:
- Monday through Friday; 8:00 am to 4:00 pm; Saturdays by Appointment
- All lots must be removed before 4:00 p.m., Within one week of the auction end date.
- Special Exceptions can be made for large items or bidders loading overseas shipments
7. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
8. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
9. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and electric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
10. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
11. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
12. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
13. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
14. Buyers may incur an additional packaging fee for all invoices. Shipping and packaging at buyers expense.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Shipping Info
Shipping and Packaging at Buyers Expense.
Video
You may also be interested in...
