Seller's terms
Lot #89: Scott Heavy Duty Index Tab Cutting and Scott 1800 Plastic Index Tab Machines
Sold by: SPRINGDALE BINDERY LLC WireBids ID #WB85370
$10: $250 to $999
$50: $1,000 to $9,999
$100: $10,000 and up
You can specify the maximum amount that you're willing to pay for an item. When you're outbid, we automatically bid on your behalf up to your maximum bid. We increase your bid by increments only as much as necessary to maintain your position as highest bidder. Keep in mind we will prefill the bid amount for you with the next minimum bid increment (even when you are outbid).
Description
Scott Machine #1 of 2
SN: 9T-03007
Manufacturer: Scott
Model: Index Tab Cutting Machine - Heavy Duty Model
Fast and Easy Setup and Operation
Handles Many Size Sheets
The extra long steel knives quickly and easily cut a 1 inch (25.4mm) tab in the first position on a 15 inch long sheet. Precision Cut a Variety of Tab and Step Cuts.
Adjust tabs to any width from 1/2 inch to 6 inches (12.7mm to 152.4mm) by simply moving knives closer or farther apart.
The full length safety bar protects the operator’s fingers from knives while rapidly inserting sheet after sheet.
Proven Durability
Knives are made from tool steel, hardened and precision ground. They are mounted on 2 inch diameter steel arbor supported by ball bearings. Accurate cutting is further ensured by the solid cast-iron machine body.
Minimal Maintenance
Speed: Up to 5,000 tabs per hour
Sheet Size: Maximum:15 inches with a half inch inset on a 1 inch tab (381mm with a 12.7mm inset cut on
a 25.4mm tab) Minimum:any width x 5-1/2 inches (139.7mm minimum depth)
Paper Weight: 6-point to 25-point paper 6 inches (152.4mm) maximum 1/2 inch (12.7mm) minimum
Tab Cut Size: Stepcut: 13-1/2 inches (342.9mm) maximum
Supports these knife sizes: 1/4”, 3/8”, 1/2”, 5/8”, 3/4” (6.3mm, 9.5mm, 12.7mm, 15.9mm, 19.1mm)
Electrical Requirement: 0.5 amp, 120 VAC, 50-60 Hz
Air Requirements: 2 cubic ft. per minute (944 cubic cm per second) at 80 lbs. pressure.
Built in pressure regulator and filter allow use of shop air or separate compressor. permits variations in cutting power.
Ball Bearings of Bushings: All Moving Parts
Lubrication: Fully Automated
Table Top: 48 inches x 15-3/4 inches x 3/8 inches (1219 mm x 400 mm x 9.5 mm)
Table Height: (Adjustable) 39-1/2 inches (1003.3 mm0 maximum 32-1/2 inches (825.5 mm) minimum
Floor Space Required: 58 inches x 26 inches (1473.2 mm x 660.4 mm)
Weight: 335 lbs. (152 kg)
____________________________________________________________________________________________
Scott Machine #2 of 2
SN: 1003-9S-04014
Manufacturer: Scott
Model: 1800 Plastic Index Tab Machine
Speed: 2,200 laminated sheets per hour
Sheet Size Maximum: 18 inches (457.2mm) Minimum: 5-1/2 inches (139.7mm)
Paper Weight: 6-point to 25-point paper
Plastic Size: 1 inch to 5-1/2 inches (25.4mm to 139.7 mm)
Air Requirements: 4 cubic ft. per minute (1888 cubic cm per second) at 80 psi
Table Top: 48 inches x 30 inches (1219mm x 762mm)
Electrical: 120 V, 50/60 Hz
Dimensions: Width: 48", Depth: 30", Height: 36". Weight: 330
Seller's Terms
We have done our best to provide as much information about these items as possible. The descriptions may be taken from the manufacturers website. There are things we do not have perfect knowledge of because features change. When there is a discrepancy between the written description and the actual item, the photographs will win out. You are bidding on the items in the photographs, not the written descriptions. Please make sure to look over ALL images. All items are sold as is, with no warranties or returns. You may inspect the equipment before purchasing (contact us to arrange an appointment).
Removal Date: Buyer must remove item(s) sold from Seller’s location within 21 calendar days of auction ending. Any item(s) not removed by Buyer from the Sellers storage location by the Removal Date will result in Buyer being in violation of these Seller’s Terms, giving Seller the right to exercise any options under these Seller’s Terms, including, but not limited to, resale or other disposal of such item(s) sold. Seller reserves the right to charge a storage charge of $100.00 per day, after the above mentioned 21 calendar days. After 30 days of auction ending, if Buyer has not removed the item(s) sold from Seller’s location, Seller has the right to resell or dispose of item(s) sold.
Shipping Info
Local pickup available. Items can be skidded, banded, or stretchwrapped, and loaded at no additional charge. We have forklift, and ground level access for smaller vehicles.
Buyer is to pay all shipping and packaging cost. Buyer to arrange and pay for any crating if requested.
We are not responsible for any damage during shipping and if it should occur, buyer and shipping company are responsible for purchasing insurance and/or making any claims for damages with the shipping company.
All items are sold as is, with no warranties or returns. You may inspect the equipment before purchasing (contact us to arrange an appointment).
Video
You may also be interested in...
