Water Eater Model 125E® Wastewater Evaporator
Reason for selling purchasing a larger unit
Price new is $14,500 Model 125E is an electrically heated waste water evaporator designed for the small to medium sized generator of wastewater. Installation is easy consisting of only an electrical hookup and a 10" diameter vent stack. The unit can be filled three different ways: (1) Using the supplied 2" coupling on the top of the unit; (2) Remove the lid and manually pour in fluid; or (3) Using the optional 70 GPM self priming fill pump. After an initial heat up time of approximately one hour, the Model 125E will evaporate 12 gallons per hour of water. The Model 125E water evaporator will automatically shut itself down via a low level control. A secondary high temperature shutoff is also provided. When a cycle is completed the waste material can either be drained via a 2" drain opening, vacuumed out of the unit through the removable lid, with a wet/dry vacuum or pump, or, if it is a solid material, scooped out.
EVAPORATION RATE
12 Gallons / Hour
TANK CAPACITY125 Gallons
TANK CONSTRUCTION
12 Gauge Tank w/ 1" Insulation,
16 Gauge Painted Exterior
TANK HEIGHT
36"
SKIMMER
Adjustable Weir Ball Valve
TANK FILL PORT
2" NPT Coupling
HEATING SYSTEM
Elevated, Electric Heating System, 27,000 Watts
DIMENSIONS
(FLOOR SPACE)38"L x 34"W x 46" H
38"L x 41"W x 46" H (with Pump or AFS)
UTILITY REQUIREMENTS
240 Volts/3 Phase/68 Amps
480 Volts/3 Phase/34 Amps (Optional)
DRAIN
Funnel Floor, 2" Drain with Plug
VENT STACK
10" Diameter
SHIPPING WEIGHT
500 Lbs.
Unit will be palletized for shipping no charge, dock available. 500LBS shipping weight. Pickup location Hanson, MA 02341
Shipping quote with zip code