Lot #63: Roland Cammjet CJ-500 Printer/Cutter

S/N ZN20926

MODEL CJ-500
Printing / Cutting method Piezo inkjet method / Media-moving method
Printing / Cutting area 53 x 984-1/8″ (1346.2 x 24998 mm)
Acceptable material widths

3.5-54″ (90-1371 mm)
No detection of the front and rear edges is possible for material measuring from 3.5 to 17″ (90 to 430 mm).
Conditions for usable materials

-Cuttable material thickness: 0.08-0.22 mm (depending on material composition)
-Maximum cuttable material thickness including base paper (backing paper): 0.4 mm
-Maximum printable material thickness including base paper (backing paper):
0.039″ (1.0 mm) when head is raised to maximum
Pigment ink capacity Exclusive UV stable pigment-ink cartridge / 220 cc +-5 cc
Pigment ink color Six colors: cyan, magenta, yellow, and black, plus either light cyan and light magenta, or orange and green
Dye ink capacity Exclusive dye-ink cartridge / 220 cc +-5 cc
Dye ink color Six colors: cyan, magenta, yellow, black, light cyan, and light magenta
Printing resolution
(printing dot resolution) 1440 dpi x 720 dpi / 720 dpi x 720 dpi / 540 dpi x 540 dpi / 360 dpi x 720 dpi / 180 dpi x 720 dpi
Acceptable tool Cutter (blade and blade holder): Special blade for CAMM-1 series
Cutting speed / Force / Offset 10-600 mm/s (10-300 mm/s in the material-feed direction) / 30-200gf / 0.000-1.500mm
Software resolution
(when cutting) 0.025 mm/step
Distance accuracy
(when cutting)

Error of less than +-0.4% of distance traveled, or 0.3 mm, whichever is greater
When distance correction has been performed (when the setting for [CALIBRATION] – [CUTTING ADJ.] has been made):

Repetition accuracy
(when cutting) 0.1 mm or less (excluding stretching/contraction of the material)
Range for assured repetition accuracy
– For materials with a width exceeding 24″(610 mm): Length 157-7/16″ (4,000 mm)
– For materials with a width of 24″ (610 mm) or less : Length 315-15/16″ (8,000 mm)
Repetition between printing and cutting +-0.5 mm max. at 25 degree Celsius (excluding possible shift caused by expansion/contraction of the material and/or by reloading the material.
Interface Bi-directional parallel interface (compliant with IEEE 1284: nibble mode)
Power consumption Print/Cut mode Maximum: 1.0A/100V-240V –10% 50/60 Hz

Standby mode
Maximum: 0.4A/100V-240V–10% 50/60 Hz
Acoustic noise level Print/Cut mode 64dB (A) or less (According to ISO7779)
Standby mode 40dB (A) or less (According to ISO7779)
Dimensions (with stand) 91-9/16″ (W) x 29″ (D) x 50-11/16″ (H)
[2325 mm (W) x 736 mm (D) x 1287 mm (H)]

Dimensions (without stand) 91-9/16″ (W) x 15″ (D) x 16-7/8″ (H)
[2325 mm (W) x 381 mm (D) x 428 mm (H)]

Weight (with stand) 231.5 lb. (105 kg)
Weight (without stand) 187.4 lb. (85 kg)
Environment Power on Temperature: 59-95 degree Fahrenheit (15-35 degree Celsius), Humidity: 35% to 80% (non-condensing)
Power off Temperature: 41-104 degree Fahrenheit (5-40 degree Celsius), Humidity: 20% to 80% (non-condensing)