Seller's terms
Lot #60: Accufast Labeller XL w/ Accufast ET Tabber
Sold by: Boggs Graphics Equipment Inventory ID #032624360009B WireBids ID #WB76085
$10: $250 to $999
$50: $1,000 to $9,999
$100: $10,000 and up
You can specify the maximum amount that you're willing to pay for an item. When you're outbid, we automatically bid on your behalf up to your maximum bid. We increase your bid by increments only as much as necessary to maintain your position as highest bidder. Keep in mind we will prefill the bid amount for you with the next minimum bid increment (even when you are outbid).
Description
Accufast Labeller XL
Accufast XL Labeler MSRP: $4,560.00
S/N: 180690
Accufast ET
S/N: 880014
Accufast XL Labeler Postage Stamp Affixer Specifications
The XL is the best table top labeler on the market. Consider a few of its design features that translate into instant productivity and reliability.
- The Labeling head slides from side to side allowing the label to be placed just about anywhere on the piece.
- The head pops off for instant maintenance, cleaning and jam removal.
- The built in feeder can feed pieces in portrait or landscape direction allowing for use as a labeler, stamp affixer or tab applicator.
- It’s quiet
- It’s built tough enough to do millions. Steel, no plastic.
- Touch pad electronic controls.
- Recommended use: Up to 25k pieces a month.
Specifications:
- Proven for productivity and reliability, the XL is the best table top stamp affixer on the market.
- Labels up to 15,000 pieces per hour
- Applies stamps on a #10 envelope at a rate of approximately 6,000 per hour
- Proven reliability and durability
- Labels/Stamps pieces 5″ to 16″ wide, from 20 lb. thin to 1/4″ thick, coated and uncoated
- Runs machine-grade labels/stamps 1″ to 4″ high, up to 6″ wide on backer with or without tractor holes
- USPS stamp roll kit/roll adapter, minimum 1″ width, 3″ core, 10″ roll max diameter
- No need to re-thread labels, splicing takes seconds
- Labels/Stamps are applied in plain sight
- Job set-ups are programmed and saved with up-to-the-minute digital electronics
- Built-in diagnostics
- Built-in waste take-up spool and counter
- Hopper holds 100 envelopes
- Holds up to 10k roll of stamps (Optional Stamp Kit required)
- English and Metric units
- Zip Code® at the push of a button
- Weighs 69 pounds, Measures 20″l x 21″w x 16″h (25″ h with stamp kit)
- Uses 115 volts 2 amps 60 Hz or 230 volts 1 amp 50 Hz
- This machine is a complete “stand alone” machine but it can also work inline with other machines.
- Sliding head for simple and exact label positioning
- LCD status panel signifies jams, full take-up spool, exact label position and other conditions
- Easy all-over access means quick maintenance
- Outstanding feature of one-touch “on the fly” adjustment for all key positioning
Accufast ET Tabletop Tabbing Machine
The Accufast ET Double-Head Edge Tabber creates mail-ready pieces by applying multiple edge tabs per piece in various positions, processing over 15,000 pieces per hour. With user-friendly controls, it has the ability to change between 1” and 1.5” tabs simply by flipping a switch.
A variety of 1” and 1.5” tab stocks can be used, including clear, translucent and paper. Built-in waste take-up spools reduce down time, and for increased efficiency, tabs can be fed fan-folded or from rolls for higher volume. The Accufast ET can also be used in-line with other tabletop labelers, feeders, printers and folders.
With the addition of the optional Accufast HDF Heavy Duty Feeder, operators can input a stack of up to 12” of material to be tabbed, up to 3/8” thick. The optional Accufast LDM High Volume Tab Delivery Module handles rolls of up to 150,000 tabs, which reduces down-time caused by reloading tabs. The optional Accufast 3FV Conveyor offers adjustable speed from 0 - 120 fpm, and stacks tabbed pieces in a neat, sequential order for easy removal.
Accufast ET
- Speed: Tabs over 20,000 pieces per hour
- Tabs Applied: Up to 3 tabs per pass
- Document Sizes: 3.5" x 9" H x 5.5" - 12" W
- Document Thickness: Up to .2" thick
- Tab Varieties: 1" or 1.5" tabs, clear, translucent or paper, circles or rectangles on rolls with or without tractor holes, high volume fan folded
- Dimensions: 20" L x 19" H x 23" W
- Weight: 60 lbs.
- Power: 115V, 4A, 60Hz or 230V, 2A, 50Hz
Seller's Terms
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
3. Buyer's Premium. You agree to pay a buyer's premium of 10% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; Within 5 Business Days of the auction. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard.
5. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
6. Removal dates. Lots will be available for pickup on these dates:
- Monday through Friday; 8:00 am to 3:00 pm; Saturdays by Appointment
- All lots must be removed before 3:00 p.m., Within one week of the auction end date.
- Special Exceptions can be made for large items or bidders loading overseas shipments
7. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
8. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
9. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and electric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
10. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
11. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
12. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
13. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
14. Buyers may incur an additional packaging fee for all invoices. Shipping and packaging at buyers expense.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Shipping Info
Shipping and Packaging at Buyers Expense.
Video
You may also be interested in...
