Seller's terms
Lot #137: X-Rite Gretag Macbeth D200-II 36.51.03 Transmission Densitometer
Sold by: Boggs Graphics Equipment Inventory ID #092016112450 WireBids ID #WB66602
$10: $250 to $999
$50: $1,000 to $9,999
$100: $10,000 and up
You can specify the maximum amount that you're willing to pay for an item. When you're outbid, we automatically bid on your behalf up to your maximum bid. We increase your bid by increments only as much as necessary to maintain your position as highest bidder. Keep in mind we will prefill the bid amount for you with the next minimum bid increment (even when you are outbid).
Description
D200-II, the transmission densitometer for professionals
Type: D 200 II
S/N: 3246-28184
The D 200-II transmission densitometer from GretagMacbeth is
the unit of choice for all applications in the field of:
• reproduction
• desktop publishing
• photo typesetting
as well as for technical and medical applications. Thanks to the microprocessor control (e.g., the controlled measuring lamp) the D 200-II features the highest accuracy within the entire measuring range, up to 6.0 D. The unit is easy to use and it is very rugged, in other words, it is the densitometer for the professional. Changing the measuring aperture and the measuring tube is a one-step operation making it easy to set up the unit for your particular application. The D 200-II meets the highest demands, no matter whether your application includes silver or diazo film, continuous tone, halftone or lineart material.
Specifications
Display digital, LCD
Measuring geometry specular / diffuse
Color temperature light source approx. 3000 Kelvin
Calibration zero point: automatic, slope: for density
Apertures Ø 1 mm, Ø 2 mm, Ø 3 mm, slotted aperture 0.3 mm x 3 mm
Reproducibility ± 0.01 D (in the range of 0 to 4 D)
Linearity ± 0.01 D (in the range of 0 to 4 D)
Interinstrument ± 0.02 D (in the range of 0 to 4 D)
agreement
Measuring ranges density 0 – > 6 D
(apertures Ø 2 resp. Ø 3 mm)
density 0 – > 5.5 D
(aperture Ø 1 mm resp. slotted aperture)
dot area 0-100%, positive / negative
Resolution 0.01 D / 1% and 0.001 D / 0.1%
0.001 D (in the range of 0 to 1 D)
0.1% (in the range of 0.0% to 99.9%)
Spectral characteristics V (l) standard
Material to be measured max. 15 mm thick, max. 610 mm wide
Warm-up time none
Dimensions 47 cm x 31 cm x 17.5 cm
Length of measuring arm 32 cm
Light table 37.5 cm x 31 cm
Weight approx. 7 kg
Options special measuring tubes
aperture Ø 0.5 mm
serial interface
Seller's Terms
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
3. Buyer's Premium. You agree to pay a buyer's premium of 10% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; Within 5 Business Days of the auction. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard.
5. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
6. Removal dates. Lots will be available for pickup on these dates:
- Monday through Friday; 8:00 am to 4:00 pm; Saturdays by Appointment
- All lots must be removed before 4:00 p.m., Within one week of the auction end date.
- Special Exceptions can be made for large items or bidders loading overseas shipments
7. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
8. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
9. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and electric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
10. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
11. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
12. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
13. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
14. Buyers may incur an additional packaging fee for all invoices. Shipping and packaging at buyers expense.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Shipping Info
Shipping and Packaging at Buyers Expense.
Video
You may also be interested in...
