Seller's terms
Lot #93: Purup Eskofot DPX Automatic Computer to Plate System
Sold by: Boggs Graphics Equipment Inventory ID #090325000800A WireBids ID #WB84889
$10: $250 to $999
$50: $1,000 to $9,999
$100: $10,000 and up
You can specify the maximum amount that you're willing to pay for an item. When you're outbid, we automatically bid on your behalf up to your maximum bid. We increase your bid by increments only as much as necessary to maintain your position as highest bidder. Keep in mind we will prefill the bid amount for you with the next minimum bid increment (even when you are outbid).
Description
S/N: 0421-0932
The Purup•Eskofot DPX By its design and technology it is a true winner. For more than 20 years now we have been designing and developing internal drum imagesetters and platesetters. This knowledge is also the trademark of DPX 5080. An environmentally friendly, low consuming processor has also been developed and this powerful combination makes all the difference – The 5080 is a Winner.
Fully automatic platemaking without manual labour The DPX is a fully automatic platesetter, this means you do not need an operator to monitor the unit at any time. You simply send your jobs to the Rip, which is set up to your requirement and the ready to use plates are stacked on the outlet tray. All you have to do is pick up the plates and start the press.
Press ready plates, cut to size When the plates are delivered on the tray they are ready to use. The Rip will position your job on the plates automatically according to the set-up you have chosen. The plates are fully exposed and have been cut to size – no trimming is needed. The built-in processor will develop and dry the plates for you. The high repeatabillity of the DPX makes it very easy to punch the plate and quickly achieve excellent register on the press.
State-of-the-art processor Purup•Eskofot’s advanced technology and experience was incorporated into the design of the unique 2-bath polyester plate processor installed in the base of the DPX 5080. The processor operates with just two very small containers, which reduces the amount of chemistry used. Two replenishment bottles are located inside the machine – with enough activator and stabiliser to feed one roll of plate material. The processor’s overflow pipe is designed to control the chemistry level in the processor bath. Excess chemicals will automatically run into a waste container and when this tank is full a warning signal tells the operator to empty the container. All the operator has to do is click the tube onto the container and push the button.
A pump will automatically empty the tank - so there is no contact with the chemicals. Film option for larger format A take-up cassette is also available if needed. The Rip software allows you to change between plates and film very easily. You simply press a rewind button to re-coil the existing media into its lightproof cassette and load the new material, with the absolute minimum of waste.
Easy to service and maintain To empty, clean and refill the unit with chemistry takes less than 10 minutes. With the DPX 5080 no time is wasted working on the machine, as many functions are within the operators capability. Making service fast and easy has been designed into the development of the DPX 5080. The unit’s design is based on modules, which makes it very easy to service and reduces any down time to an absolute minimum.
Specifications:
Platesetter Unit Technology:
- Digital Exposure System for Silver Halide Polyester or film.
- Internal drum.
Material:
- 1 magazine
- Material definition: Up to 10
- Cassette definition: Up to 16
- Capacity of material: Up to 61 m / 220 ft per roll.
- Plate / film thickness: 4 Mil / 0.1 mm - 8 Mil / 0.2 mm
Max Plate Format:
- Polyester: 340 x 508 mm / 13,4 x 20”
- Film: 355 x 508 mm / 14 x 20”
Image Definitions:
- Max. image format: 340 x 488.9 mm / 13.4 x 19.25”
- Image repeatability: 25 µm / 0.00098” over 4 plates
- Edge to image register: Lead edge: +/- 0.4 mm / +/- 0.016” over 4 plates Media side edge: +/- 0.2 mm / +/- 0.008” over 4 plates
Exposure:
- Light source: 675 nm visible red laser diode
- Resolution in dpi: 900 - 3600
- Spot size: 8-26 µm
Production Speed:
- 2540 dpi: 28 plates per hour
- 900 dpi: 45 plates per hour
Processor:
- 2 baths, activator and stabilizer.
- Tank capacity: 3.5 / 2.5 litres (0.9 / 0.6 gallons)
- Active replenishment
- Waste tank capacity: 15 litres (3.9 gallons)
Plate Dryer:
- Computer controlled.
Temperature range:
- 30 - 50°C / 86 - 122°F
Pre-Installation Data:
- Dimensions (HxWxD): 1300 x 1050 x 1105 mm / 51.2 x 41.4 x 43.5”
- Net weight: 250 kg / 550 lbs
- Power requirements: 200 - 240 V, 50/60 Hz
- Power consumption: 15 Amp
Seller's Terms
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
Binding Contract - If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
Buyer's Premium - You agree to pay a buyer's premium of 10% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
Payment - Full payment for any lot must be received by the seller before 2:00 PM EST; Within 3 Business Days of the auction. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard.
Removal - No lot may be removed or taken possession of until the seller has received full payment for that lot. Proof of payment must be presented to the seller upon pickup. All articles purchased must be removed within the removal deadlines listed in Section 6 of these Terms & Conditions. Failure to remove purchases within the designated time may result in additional storage charges or abandonment of the item, at the seller's discretion.
Removal dates - Lots will be available for pickup on these dates:
Monday through Friday; 7:00 am to 4:00 pm; Saturdays by Appointment.
Loading Assistance is only available till 3:00 PM or by Appointment
All lots must be removed before within 10 Business days of the auction end date.
Special exceptions can be made for large items or bidders loading overseas shipments.
Preparation of lots - Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
Complete agreement - These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitute the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
Shipping Terms
Small Items - Under 100 lbs:
Shipping Methods: Via UPS, FedEx, or USPS.
Packaging: Provided at no additional charge.
Disassembly Restrictions: We will not disassemble large items to ship them as multiple small items via UPS.
Arrangements: Our in-house shipping manager will only arrange shipments via UPS. For FedEx or USPS, the buyer must arrange pickup and provide a shipping label.
Large Items - Over 100 lbs or Too Large for Parcel Services:
Delivery Service (Boggs Truck Delivery) - For larger items, we offer direct delivery using our company trucks, subject to availability based on delivery routes, scheduling, and equipment requirements. Delivery rates vary depending on mileage, item size, and delivery complexity. Please contact us prior to bidding to discuss delivery options and obtain a quote. Delivery charges must be paid in full prior to scheduling.
LTL Freight Shipments - Items requiring LTL freight shipment, defined as weighing over 100 pounds or exceeding standard parcel carrier size limits, will require packaging at the buyer’s expense. Packaging fees will vary depending on the size, weight, and complexity of the item. Packaging charges are separate from the purchase price and must be paid prior to release of the item. Please contact us prior to bidding if you would like an estimated packaging cost for a specific lot.
Large Items - LTL Shipping Arrangements:
In-House Arrangements: Our in-house shipping manager can arrange shipping through multiple LTL carriers at the buyer's expense. Full coverage insurance is included in our in-house shipping rates for used equipment shipped via LTL carriers.
Buyer Arrangements: Buyers can also arrange their own LTL shipping but will be required to sign a waiver stating they take responsibility for any damage that might occur. This waiver is required because LTL carriers generally only insure used equipment for $0.01 per pound.
Auction site - Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and electric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
Storage, Abandonment, and Non-Removal Policy
All items must be removed within the timeframes outlined in Section 6 unless otherwise agreed to in writing.
Any item not removed within 15 days after the auction closes, or 10 days after packaging notification (whichever is later), will begin incurring storage charges, unless other arrangements have been made in writing. Storage is billed at a rate of $50 per pallet position (4'x4') per month, rounded up to the nearest whole pallet and whole month. Storage charges must be paid in full prior to item pickup.
If an item is not removed within 30 days without prior arrangements, the buyer will receive a final notice allowing an additional 15 days to remove the item or pay any outstanding storage fees.
If no action is taken within the final notice period, the item will be considered abandoned, and the seller reserves the right to resell, dispose of, or otherwise manage the item without further liability. No refunds, chargebacks, or compensation will be provided for abandoned items.
Alternatively, at the seller’s sole discretion, and in lieu of declaring an item abandoned, the seller may choose to refund the buyer the purchase price paid, less any applicable storage, packaging, or administrative costs, and cancel the sale.
This auction is conducted as a reserve auction, and the seller reserves the right to bid.
Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Shipping Info
Shipping Terms
Small Items - Under 100 lbs:
Shipping Methods: Via UPS, FedEx, or USPS.
Packaging: Provided at no additional charge.
Disassembly Restrictions: We will not disassemble large items to ship them as multiple small items via UPS.
Arrangements: Our in-house shipping manager will only arrange shipments via UPS. For FedEx or USPS, the buyer must arrange pickup and provide a shipping label.
Large Items - Over 100 lbs or Too Large for Parcel Services:
Delivery Service (Boggs Truck Delivery) - For larger items, we offer direct delivery using our company trucks, subject to availability based on delivery routes, scheduling, and equipment requirements. Delivery rates vary depending on mileage, item size, and delivery complexity. Please contact us prior to bidding to discuss delivery options and obtain a quote. Delivery charges must be paid in full prior to scheduling.
LTL Freight Shipments - Items requiring LTL freight shipment, defined as weighing over 100 pounds or exceeding standard parcel carrier size limits, will require packaging at the buyer’s expense. Packaging fees will vary depending on the size, weight, and complexity of the item. Packaging charges are separate from the purchase price and must be paid prior to release of the item. Please contact us prior to bidding if you would like an estimated packaging cost for a specific lot.
Large Items - LTL Shipping Arrangements:
In-House Arrangements: Our in-house shipping manager can arrange shipping through multiple LTL carriers at the buyer's expense. Full coverage insurance is included in our in-house shipping rates for used equipment shipped via LTL carriers.
Buyer Arrangements: Buyers can also arrange their own LTL shipping but will be required to sign a waiver stating they take responsibility for any damage that might occur. This waiver is required because LTL carriers generally only insure used equipment for $0.01 per pound.
Video
You may also be interested in...
