Seller's terms
Lot #20: 2018 Harris & Bruno ExcelCoat ZR-30 Fully Automated Inline / Offline UV Coating System
Sold by: Boggs Graphics Equipment Inventory ID #101223285001B WireBids ID #WB73349
$10: $250 to $999
$50: $1,000 to $9,999
$100: $10,000 and up
You can specify the maximum amount that you're willing to pay for an item. When you're outbid, we automatically bid on your behalf up to your maximum bid. We increase your bid by increments only as much as necessary to maintain your position as highest bidder. Keep in mind we will prefill the bid amount for you with the next minimum bid increment (even when you are outbid).
Description
MACHINE IS SKIDDED AND READY FOR SHIPPING. CAN LOAD ON A CONTAINER AT NO EXTRA CHARGE.
CAN MAKE SHIPPING ARRANGEMENTS ANYWHERE IN THE US!
Job#: HB9345
Model: ZR30
S/N: ZR12030159
The ZR is the most versatile of machines engineered for advanced automation, high throughput, and quick changeovers. Harris & Bruno International has revolutionized offline coating by introducing ExcelCoat, a workhorse of a machine built with high-quality components that can replace multiple UV coaters and meet modern production speeds.
BUILT-IN SAFETY
Sheet monitoring by various sensors help reduce accidents, and work to keep your plant safe. With features such as sheet tracking and automatic lifting of the dryer, your coater can help prevent accidents before they happen.
REDUCED DOWNTIME
Through incorporating a Chamber/Anilox Metering System, ExcelCoat consistently lays down Matte, Soft Touch, AQ, Specialty UV, and superb Gloss. Automated adjustments, quick changeovers and 50 memory set-points offer the ability to coat a wide assortment of print variables. Plus, Harris & Bruno’s renowned quality and service guarantee years of dependability!
Features
Chamber/Anilox Metering System
Quick-Change Anilox System
Eccentric Bearings for Roller Positioning
1-3 Fully Automated Pumping Systems
Silde-Out Coating Cabinet
Linked PLC Control System
Full-length Vacuum System Prevents Fires
Pneumatically Controlled UV Lamp Chamber
Sealed Lamp Cooling with Adjustable Air Flow
IR Dryer with Hot Air Knives
Up to a 42" Extended Feeder & Stacker
Specifications
Maximum Coating Width
30 in. (762 mm)
Minimum Sheet Size
6 x 6 in. (152 x 152 mm)
Maximum Sheet Size
30 x 30 in. (762 x 762 mm)
Minimum Sheet Thickness
UV 0.006 in (0.15 mm)
AQ 0.008 in. (0.20 mm)
Minimum Sheet Thickness
w/ TS 2.0 Thin Substrate System
UV 0.003 in (0.075 mm)
AQ 0.004 in. (0.10 mm)
Maximum Sheet Thickness
0.024 in. (0.61 mm)
Minimum Floor Space Required
12 x 4.4 ft. (3.66 x 1.34 m)
Seller's Terms
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
3. Buyer's Premium. You agree to pay a buyer's premium of 10% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; Within 5 Business Days of the auction. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard.
5. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
6. Removal dates. Lots will be available for pickup on these dates:
- Monday through Friday; 8:00 am to 3:00 pm; Saturdays by Appointment
- All lots must be removed before 3:00 p.m., Within one week of the auction end date.
- Special Exceptions can be made for large items or bidders loading overseas shipments
7. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
8. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
9. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and electric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
10. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
11. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
12. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
13. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
14. Buyers may incur an additional packaging fee for all invoices. Shipping and packaging at buyers expense.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Shipping and Packaging at Buyers Expense.
Shipping Info
Shipping and Packaging at Buyers Expense.
Video
You may also be interested in...
