Seller's terms
Lot #20: 2011 Hunkeler Gen 6 Roll to Sheet System w/ CS6-II Cutter, SE6 Separator, LS6 Stacker, and UW6 Unwinder
Sold by: Boggs Graphics Equipment Inventory ID #092525855009B WireBids ID #WB85402
$10: $250 to $999
$50: $1,000 to $9,999
$100: $10,000 and up
You can specify the maximum amount that you're willing to pay for an item. When you're outbid, we automatically bid on your behalf up to your maximum bid. We increase your bid by increments only as much as necessary to maintain your position as highest bidder. Keep in mind we will prefill the bid amount for you with the next minimum bid increment (even when you are outbid).
Description
Stacker S/N: LS6 7191.00438-02/95
Separator S/N: SE6 7192.00068-01/78
Cutter S/N: CS6-II 7184.01642A-04/21
Unwinder S/N: UW6 HP 7183.00405-11/94
SC6-II Cutter:
Purpose
The purpose of the CS6-II is to cut a continuous paper web into sheets using a rotary single or double cut cylinders (with chip out). It can handle a variety papers, ranging from lightweight newsprint to card stock. The cutter can be used with most digital continuous printers, as well as offline with an unwinder. Its capabilities extend from 1-up to 4 up production.
On-Line from Printer
Off-Line from Roll
Method of operation
The paper web, arriving from the pre-processing module, is fed in by the pinless infeed roller to the cutting cylinder which cuts the paper web using a rotary knife. Directly after the cutting process, the sheets are conveyed to the post processing module by a sheet outfeed mechanism. The post-processing module can be almost any type of equipment such as a stacker, buckle folder, or shingle delivery.
Chip out: The CS6-II cutter is capable of cutting a chip out of the web. The chip out length is set electronically. Chip out mode can be activated, or deactivated via the panel to handle any kind of pre printed or blank paper.
Blank sheets caused by the printer's start-up procedure can be automatically diverted using the integrated dynamic diverter and are not passed on to the post-processing module. Any sheets cut during the set-up procedure are also automatically ejected by the diverter.
Document control (e.g. offsetting, stack separation) is controlled by either a counter, separation marks, barcodes, or markless.
Basic equipment
- Basic module with two rotary high-performance shear type cutting cylinders
- User-friendly touch screen machine terminal for set-up and basic operating functions
- Casing with safety monitoring
LS6 Stacker:
Purpose
The LS6 stacker collects sheets and passes the finished stacks over to the post processing. Stack separation and stack offset are done non-stop (without printerstops).
Method of operation
Sheets, arriving from the pre-processing module, are transported on the stacking table using vacuum belts which allow very careful handling of the sheets avoiding any damage of the printed image. Stack separation is accomplished without printer stops in shortest time. The dynamic CS6 cutter interrupts the sheet stream for less than a second to allow the LS6 stacker to insert a new stacking table for the next stack. Afterwards, stacks are ejected on to the conveyor belt.
The LS6 stacker can handle 1-up to 4-up sheet streams delivered by the SE6 separation, alignment and offset module.
Basic equipment
- Basic module with vacuum belt sheet transport and stacking device
- User-friendly touch screen machine terminal for set-up and basic operating functions
- Casing with safety monitoring
SE6 Separator:
Purpose
The SE6 module integrates three different functions in one module:
A) Sheet offsetting on the fly (OOF) without any loss of performance
B) sheet alignment for optimum stack quality in the LS6 stacking module
C) Lateral sheet separation allows offset stacking
The module can handle 1-up up to 4-up sheet streams, depending on the module configuration
Method of operation
The sheet streams from the CS6 cutting module are aligned, separated and offset, while the sheets run through the SE6 module.
None of the SE6 functions limits the performance of the line in any way.
Basic equipment
- Basic module
- Casing with safety monitoring
UW6 Unwinder:
Purpose
Continuous supply of non-impact printers off the roll over a period of several hours.
Method of operation
By pressing a switch the roll with the mandrel inserted is brought into the working position by the motor-driven mechanism. After the paper-web has been pulled in manually, initialization of the module takes place automatically. The roll is driven at the center. The unwinding speed follows the requirements of the printer, under electronic control. The paper rolls can be unwound in either direction of rotation.
Basic equipment
- Unwinding support-frame with electro-mechanical roll insertion
- Operator interface with touch screen
- Adjustable photocell for detecting minimum roll diameter
- Fully automatic danc
Seller's Terms
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
Binding Contract - If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
Buyer's Premium - You agree to pay a buyer's premium of 10% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
Payment - Full payment for any lot must be received by the seller before 2:00 PM EST; Within 3 Business Days of the auction. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard.
Removal - No lot may be removed or taken possession of until the seller has received full payment for that lot. Proof of payment must be presented to the seller upon pickup. All articles purchased must be removed within the removal deadlines listed in Section 6 of these Terms & Conditions. Failure to remove purchases within the designated time may result in additional storage charges or abandonment of the item, at the seller's discretion.
Removal dates - Lots will be available for pickup on these dates:
Monday through Friday; 7:00 am to 4:00 pm; Saturdays by Appointment.
Loading Assistance is only available till 3:00 PM or by Appointment
All lots must be removed before within 10 Business days of the auction end date.
Special exceptions can be made for large items or bidders loading overseas shipments.
Preparation of lots - Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
Complete agreement - These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitute the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
Shipping Terms
Small Items - Under 100 lbs:
Shipping Methods: Via UPS, FedEx, or USPS.
Packaging: Provided at no additional charge.
Disassembly Restrictions: We will not disassemble large items to ship them as multiple small items via UPS.
Arrangements: Our in-house shipping manager will only arrange shipments via UPS. For FedEx or USPS, the buyer must arrange pickup and provide a shipping label.
Large Items - Over 100 lbs or Too Large for Parcel Services:
Delivery Service (Boggs Truck Delivery) - For larger items, we offer direct delivery using our company trucks, subject to availability based on delivery routes, scheduling, and equipment requirements. Delivery rates vary depending on mileage, item size, and delivery complexity. Please contact us prior to bidding to discuss delivery options and obtain a quote. Delivery charges must be paid in full prior to scheduling.
LTL Freight Shipments - Items requiring LTL freight shipment, defined as weighing over 100 pounds or exceeding standard parcel carrier size limits, will require packaging at the buyer’s expense. Packaging fees will vary depending on the size, weight, and complexity of the item. Packaging charges are separate from the purchase price and must be paid prior to release of the item. Please contact us prior to bidding if you would like an estimated packaging cost for a specific lot.
Large Items - LTL Shipping Arrangements:
In-House Arrangements: Our in-house shipping manager can arrange shipping through multiple LTL carriers at the buyer's expense. Full coverage insurance is included in our in-house shipping rates for used equipment shipped via LTL carriers.
Buyer Arrangements: Buyers can also arrange their own LTL shipping but will be required to sign a waiver stating they take responsibility for any damage that might occur. This waiver is required because LTL carriers generally only insure used equipment for $0.01 per pound.
Auction site - Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and electric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
Storage, Abandonment, and Non-Removal Policy
All items must be removed within the timeframes outlined in Section 6 unless otherwise agreed to in writing.
Any item not removed within 15 days after the auction closes, or 10 days after packaging notification (whichever is later), will begin incurring storage charges, unless other arrangements have been made in writing. Storage is billed at a rate of $50 per pallet position (4'x4') per month, rounded up to the nearest whole pallet and whole month. Storage charges must be paid in full prior to item pickup.
If an item is not removed within 30 days without prior arrangements, the buyer will receive a final notice allowing an additional 15 days to remove the item or pay any outstanding storage fees.
If no action is taken within the final notice period, the item will be considered abandoned, and the seller reserves the right to resell, dispose of, or otherwise manage the item without further liability. No refunds, chargebacks, or compensation will be provided for abandoned items.
Alternatively, at the seller’s sole discretion, and in lieu of declaring an item abandoned, the seller may choose to refund the buyer the purchase price paid, less any applicable storage, packaging, or administrative costs, and cancel the sale.
This auction is conducted as a reserve auction, and the seller reserves the right to bid.
Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Shipping Info
Shipping Terms
Small Items - Under 100 lbs:
Shipping Methods: Via UPS, FedEx, or USPS.
Packaging: Provided at no additional charge.
Disassembly Restrictions: We will not disassemble large items to ship them as multiple small items via UPS.
Arrangements: Our in-house shipping manager will only arrange shipments via UPS. For FedEx or USPS, the buyer must arrange pickup and provide a shipping label.
Large Items - Over 100 lbs or Too Large for Parcel Services:
Delivery Service (Boggs Truck Delivery) - For larger items, we offer direct delivery using our company trucks, subject to availability based on delivery routes, scheduling, and equipment requirements. Delivery rates vary depending on mileage, item size, and delivery complexity. Please contact us prior to bidding to discuss delivery options and obtain a quote. Delivery charges must be paid in full prior to scheduling.
LTL Freight Shipments - Items requiring LTL freight shipment, defined as weighing over 100 pounds or exceeding standard parcel carrier size limits, will require packaging at the buyer’s expense. Packaging fees will vary depending on the size, weight, and complexity of the item. Packaging charges are separate from the purchase price and must be paid prior to release of the item. Please contact us prior to bidding if you would like an estimated packaging cost for a specific lot.
Large Items - LTL Shipping Arrangements:
In-House Arrangements: Our in-house shipping manager can arrange shipping through multiple LTL carriers at the buyer's expense. Full coverage insurance is included in our in-house shipping rates for used equipment shipped via LTL carriers.
Buyer Arrangements: Buyers can also arrange their own LTL shipping but will be required to sign a waiver stating they take responsibility for any damage that might occur. This waiver is required because LTL carriers generally only insure used equipment for $0.01 per pound.
Video
You may also be interested in...
