Seller's terms
Lot #73: Muller Martini 335 Booklet Making System with Stitcher, Trimmer, Cover Feeder, Stacker and Four Feeders - Ships from Church Hill, TN - Click for Video!
Sold by: Boggs Graphics Equipment WireBids ID #WB42823
$10: $250 to $999
$50: $1,000 to $9,999
$100: $10,000 and up
You can specify the maximum amount that you're willing to pay for an item. When you're outbid, we automatically bid on your behalf up to your maximum bid. We increase your bid by increments only as much as necessary to maintain your position as highest bidder. Keep in mind we will prefill the bid amount for you with the next minimum bid increment (even when you are outbid).
Description
Muller Martini 335 Booklet Making System with Stitcher, Trimmer, Cover Feeder, Stacker and Four Feeders
Comes with four stitching heads, one of which is brand new, and another of which has only been used for three shifts. The knives in the trimmer are sharp, and it comes with a number of extra knives, some of which are brand new.
Quick make-ready - high productivity
Saddle Stitcher 335 is ideal for magazines, booklets, leaflets, financial
reports and a wide range of products. Advantages of the machine:
Extremely flexible
Universal base for section feeders, card gluers and folder feeders.
Feeder change in minutes
All feeder heads have identical dimensions and have plug-in air and
electrical connections.
Ideal loading height
The hopper is only 1.1 m (43") above floor level and can therefore be
loaded comfortably without a platform.
Precise stitching
Assured by the patented flying stitching heads - for regular or loop stitching.
Built-in quality controls
Dependable caliper, oblique sheet and trim monitors assure consistent
quality.
Accurate trimming
Assured by 3-knife Trimmer 890, the ideal complement to Saddle
Stitcher 335.
In-line to the loading dock
Modular design allows expansion at any time.
Outstanding features
High productivity and dependability
quick make-ready
high production speed
broad product size range
standardized, interchangeable feeder heads
automatic monitoring and quality controls
heavy-duty construction for round-the-clock production
exceptional operating convenience
low-silhouette feeders (1 .1 m/43") for easy loading
simple set-up
individual ON, OFF and 2:1 mode selection at each feeder
electrically interlocked protective covers
sound absorbing covers to reduce noise level
central control console
simple maintenance
plug-in air and electrical connections
convenient access and layout
Specifications:
Equipment Feeder 306
Saddle Stitcher 335
Three Knife Trimmer 89O
Maximum mechanical speed 12,000cph
Sizes:
untrimmed (high folio) max. 480 x 320mm 18-1/8" x 12-9/16"
untrimmed (no lap) max. 400 x 290mm 15-3/4" x 11-7/16"
untrimmed (with accessories) min. 105 x 80mm 4-1/8" x 3-1/8"
trimmed (high folio) max. 470 x 300mm 18-1/2" x 13-13/16"
trimmed min. 148 x 75mm 5-13/16" x 2-15/16"
trimmed (with accessories) min. 98 x 75mm 3-7/8" x 2-15/16"
4th and 5th knife max.2 x 235 x 300mm 2 x 9-1/4" x 11-13/16"
w/o accessories min. 2 x 148 x 75mm 2 x 5-13/16" x 2-15/16"
with accessories min. 2 x l00 x 75mm 2 x 3-15/16" x 2-15/16"
Number of stitching heads
(HK-55, HK 75, HK-75V, 249) max. 6
Stitching capacity HK-55 max. 3mm 1/8"
HK-75,HK75V max. 5mm 3/16"
Loop heads 249 max. 3mm 1/8"
Power consumption (drive systems) with max. 10 feeders 7.4 kW
with max. 14 feeders 11 kW
Sold as-is, where-is in Church Hill Tennessee. The machine will need rigged, at buyer’s expense. We can help locate a rigger if needed.
Seller's Terms
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
3. Buyer's Premium. You agree to pay a buyer's premium of 9% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; March 12th, 2019. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard, Paypal
5. There will be a 4% Buyers Premium Discount on any payments made by Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check
6. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
7. Removal dates. Lots will be available for pickup on these dates:
- Monday through Friday; 8:00 am to 4:00 pm; Saturdays by Appointment
- All lots must be removed before 4:00 p.m., Friday, March 15th, 2019
- Special Exceptions can be made for large items or bidders loading overseas shipments
8. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
9. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
10. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and eletric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
11. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
12. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
13. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
14. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
15. Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Shipping Info
Large items will be skidded, banded, and shrinkwrapped at no additional charge if buyers total invoice is over $1000. We also offer UPS & FEDEX packaging at a small charge for smaller items if total invoice is under $1000 or FREE packaging if over $1000. We also have multiple loading docks, forklifts, and ground level access for loading buyers vehicles
Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.
Video
You may also be interested in...
