Graphtec CE6000-60 Plus 24" Vinyl Cutter Plotter
Cutter Plotter Description
The Graphtec CE6000-60 Plus 24" Vinyl Cutter and Plotter is amongst the easiest to use on the market while yielding high quality results every time. This cutting plotter is featured with 39 inches per second cutting speed, a 4.41 Newton cutting force, and a 24" cutting width. The built-in front control panel provides complete parameter control including eight preset cutting conditions, as well as advanced features like tangential control mode, down force offset, pen up speed, blade wear monitoring and more. Managing your cutting jobs is simpler than ever with its 25 pin RS-232C, High Speed USB 2.0 control interface, and a larger LCD screen. The Graphtec CE6000-60 Plus 24" Vinyl Cutter and Plotter comes standard with floor stand, Cutting Master Plug-in, and Graphtec's ARMS (Automatic Registration Mark Sensor) system. Also available in other models with 15" (desktop) or 48" cutting widths.
Cutter Plotter Features
3.7 inch wide user-friendly LCD control Panel. Setting can be easily configured using the large LCD (3.7-inches, 240x128 dots) and tactile control panel. It is also icon driven and supports 10 languages..
High adaptability to the operating environment. The design of the media feed system ensures that loaded media is acclimated to the ambient temperature and humidity before plotting or cutting. The user-selectable media pre-feed function sets two outer tracks, enhancing media handling. Together, these two media feed elements ensure reliable cutting and plotting quality within the desired operating environment.
Easy to use in simple operation mode. Two set up menus: simple and normal are available an can be chosen by the operator as desired.
Media brake on the media stocker. A brake system is incorporated to assist loading heavy rolls of media properly.
Dual tool configuration and easy switching between cutting and plotting. The pen carriage holds both a plotting pen and a blade at the same time — to enable easy switching between plotting and cutting operations. Four sets of user-specified setup parameters are retained in memory for instantaneous recall. The pen is for plotting and detailing graded patterns with seams, text, notches, Grain direction, etc.
Enhanced speed when cutting. Innovative features include maximum cutting speeds of 39 ips and with a maximum cutting force of 450g. It also features an easy to use menu navigation system with eight groups of preset conditions which facilitates instantaneous recall of pre-programmed job-specific plotter setups. Tri-port connectivity (USB, parallel and serial) makes the CE6000 Plus Series compatible with virtually any computer configuration.
Reliable long length tracking up to 196.85 inchs long. The built-in front control panel provides complete parameter control including eight preset cutting conditions, as well as advanced features like tangential control mode, down force offset, pen up speed, blade wear monitoring and more. With a 25 pin RS-232C or the High Speed USB 2.0 control interface, the CE6000 Plus Series is compatible with legacy computer systems as well as the latest PCs available now and for several years to come.
ARMS 5.0 for high precision cutting in the print and cut application. ARMS is an abbreviation for Advanced Registration Mark Sensing system, which uses sensors to detect registration marks and performs the AXIS ALIGNMENT.
Cutter Plotter Specifications
Configuration: Grit roller with digital servo drive system
Maximum cutting area (W x L): 23.74 in x 164 ft 0.5 in (603 mm × 50 m)
Cutting area of guaranteed accuracy (W x L) (when using the basket): 1 ft 11 in x 16 ft 4.85 in (584 mm × 5 m)
Mountable media width: Min. 1.97 in to Max. 28.03 in (Min. 50 mm to Max. 712 mm)
Number of push rollers: 2 rollers
Maximum cutting speed: 35 inches per second
Maximum acceleration: 69.55 ft (21.2 m/s2), at 45º direction
Maximum cutting force: 4.41 N (450 gf) in 38 steps
Minimum character size: Approx. 5 mm alphanumeric (varies depending on character font and type of media)
Programmable resolution: GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm, HP-GL: 0.025 mm
Repeat-ability: Max. 0.1 mm in plot up to 2 m
Mountable number of tools: 1 tool
Blade type: Supersteel
Pen type: Oil-based ballpoint, Water-based fiber-tip pen
Media type: Self-adhesive marking film (vinyl, fluorescent, reflective) excluding high-intensity reflective film, up to 0.25 mm thickness Polyester film, up to 0.25mm thickness (unguaranteed accuracy)
Interface: RS-232C, USB2.0
Buffer memory: 2 MB
Command sets: GP-GL / HP-GL emulation (Set by command or auto-detect)
Display: Graphic type LCD with back-light (240dots x 128dots), supports 10 languages
Registration mark sensing system: Marks are scanned by an optical sensor (ARMS5.0), Segment area and Multiple marks compensation, 4-points axis alignment, Auto mark detect
Alignment accuracy: Maximum 0.3 mm with printed image (when reading registration marks specified by this machine)
Power source: 100 to 120, 200 to 240 V AC (Auto switch), 50 / 60 Hz
Power consumption: 120 VA
Operating environment: 10 to 35 ºC, 35 to 75 % R.H. (non-condensing)
Guaranteed accuracy environment: 16 to 32 ºC, 35 to 70 % R.H. (non-condensing)
External dimensions (W x D x H) : Approx. 35.43 x 23.34 x 41.18 in (900 × 593 × 1046 mm)
Weight: Approx. 46.29 lb (21 kg) (including stand 17.85 lb, 8.1 kg)
Compatible OS: Windows 10 / 8.1 / 8 / 7; Mac OSX 10.6 to macOS 10.12 (Graphtec Studio: 10.6 - 10.12, Cutting Master 4: 10.7 - 10.12)
Included software: Cutting Master 4, Graphtec Pro Studio (for Windows), Graphtec Studio (for Mac), Windows driver, Cutting Plotter Controller
Compatibility Standards: Safety UL / cUL, CE mark, RoHS Directive; EMC VCCI Class A, FCC Class A, EN55022 Class A
The following terms apply to this Online Auction. By participating in this online auction, you agree to abide by these terms and conditions. “Seller” means Boggs Graphics Equipment LLC, the user on the website who is offering the goods for sale.
1. ALL ITEMS ARE SOLD AS IS, WHERE IS, WITH NO WARRANTIES OR RETURNS.
2. Binding Contract. If you are the highest bidder on a lot when the lot closes, you agree to purchase that lot for the hammer price plus the buyer's premium. Please bid with care.
3. Buyer's Premium. You agree to pay a buyer's premium of 9% of the hammer price in addition to the hammer price of any lot you win. This premium will be added to the hammer price in your invoice.
4. Payment. Full payment for any lot must be received by the seller before 2:00PM EST; Within 5 Business Days of the auction. The seller accepts the following forms of payment: Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check, American Express, Discover, Visa, Mastercard, Paypal
5. There will be a 4% Buyers Premium Discount on any payments made by Cash, Cashiers/Bank Check, Money Order, Wire Transfer, ACH (Electronic Check), Business Check
6. Removal. You may not remove or take possession of any lot until the seller receives payment in full for that lot. You must present proof of payment to the seller upon pickup.
7. Removal dates. Lots will be available for pickup on these dates:
- Monday through Friday; 8:00 am to 4:00 pm; Saturdays by Appointment
- All lots must be removed before 4:00 p.m., Within one week of the auction end date.
- Special Exceptions can be made for large items or bidders loading overseas shipments
8. Preparation of lots. Seller will make reasonable efforts to make the purchased lots accessible to the winning bidder on the dates of removal. Seller will not be responsible for securing or unloading lots once they are loaded at our facility. Any damage or liability caused by incorrectly securing items will be the sole responsibility of the Purchaser.
9. Complete agreement. These terms and conditions, together with any posted notices and/or additional terms provided in the description of any lots within this auction, constitutes the entire terms and conditions on which property listed in the auction sale catalog shall be offered for sale or sold by Seller, and any consignor of such property for whom Seller acts as agent. No oral agreements made between Buyer and Seller shall be valid unless memorialized by both parties in writing. Seller strongly recommends to all bidders to thoroughly inspect all items before the auction on which bidder intends to bid.
10. Auction site. Bidder acknowledges that an auction site is a potentially dangerous place. Flammable, noxious, corrosive and pressurized substances may be present, heavy equipment may be in operation, and eletric circuits may be live. Every person at the auction site before, during and after the auction sale, shall be deemed to be there at his/her own risk with notice of the condition of the premises, the activities on the premises, and conduct of third parties; and the bidder shall so advise his/her agents and employees. No person shall have any claim against Seller, its consignors, agents, employees, directors or principals for any injuries sustained or for damages to or loss of personal property, which may occur from any cause whatsoever.
11. If Seller or its consignor is unable to deliver any lot or any necessary documentation required in respect of any lot, the Purchaser’s sole and exclusive liability shall be the return of any monies paid on such lot.
12. Absolutely NO RETURN of sold goods, NO REFUNDS, and NO EXCHANGES will be permitted.
13. No article shall be removed unless paid for in full and all articles purchased shall be removed within the time period herein provided in the Event Specific Terms & Conditions.
14. Time shall be of the essence. If the Purchaser fails to make payment or remove goods within the time periods herein provided, the Auctioneer may resell the article purchased by auction, private contract or otherwise, as the Seller in his discretion deems advisable. If the Purchaser fails to pay the seller in full for his item by the payment due date, the Purchaser shall owe Seller liquidated damages in the amount of 25% of the hammer price of that item.
15. Buyers may incur an additional packaging fee for all invoices totaling under $1000 for this auction. Each individual item can be palletized on a standard pallet of $25, packaged in a card board box with packing material for $25, placed on a custom pallet for $50, or custom crated for $100. Contact Boggs Equipment for clarification.
Boggs Graphics Equipment, LLC is the "agent of sale" only; we fill out and file NO paperwork to assist with exportation.
Note: Buyers premium is 9% (5% if paid by check or wire), If invoice is paid by Check or Wire buyers premium is only 5%
Boggs Equipment can make shipping arrangements anywhere in the US. For Overseas shipments, you will have to contact a freight forwarder or broker, but we can load any truck or container at no extra cost. - contact us at sales@boggsequipment.com or at (888) 837-8101 for more information
Please be sure to view all the photos by clicking the “lot images” link on each individual lot page. Click on the picture of the item you want to view in "lot photos" to enlarge picture. Some items may have video.
First Lots Ends: Thursday, March 25th @ 1:00 PM EST
If you have any questions please feel free to call us @ 1.888.837.8101 or E-mail: Sales@BoggsEquipment.com
We are selling the best assets of multiple printing companies in one auction. We DO NOT provide any warranties or guarantees. All items are presumed to be in working condition when taken out of service. Boggs Equipment strongly encourages bidders to come and inspect the items in person, or to send a representative to evaluate the item(s) for their own self interest.
-Bidding Extensions are 5 Minutes
-All Items located in the Boggs Equipment warehouse will be skidded, banded, shrink wrapped, and loaded at no additional charge. We have multiple loading docks, forklifts, and ground level access for smaller vehicles.
-We have done our best to provide as much information about these items as possible. The descriptions are taken from the manufacturers website. There are things we do not have perfect knowledge of because features change. When there is a discrepancy between the written description and the actual item, the photographs will win out. You are bidding on the items in the photographs, not the written descriptions. Please make sure to look over ALL images.
- Special Notice International Bidders: We greatly appreciate your business. In the past, we have tried to work with you on payment and shipping. We have no problem with holding equipment for up to 30 days for shipping, but it MUST be PAID for within 3 DAYS. We will work with you on trying to complete a container, but PLEASE do not bid if you cannot meet these conditions. We do not like to relist items!
Payment Deadline is 5 Business Days after auction closes (Items paid by check or wire will save 4% on buyers premium)
**No foreign credit cards over $2,000.00 (Excluding Canada)
Special Notice:
For this quantity of items lots will be staggered only 2 minutes apart. Items on this auction will close quickly so please have your proxy bids in before the auction starts closing to avoid missing out.
**To view videos, click the "Play Video" tab above the item description**